2012 Ford Ranger T6 Undercarriage and Engine Spied
Hot on the heels of exclusive interior photos of the 2012 Ford Ranger T6, the Pavle.com.au spies have snapped scoop photos of the vehicle’s undercarriage and engine bay.
Paul Maric from CarAdvice had this to say about the scoop spy photographs.
If it wasn’t enough that CarAdvice brought you exclusive scoop photos of the 2012 Ford Ranger ‘T6? interior, the CarAdvice spies have provided us with exclusive scoop photos of the 2012 Ford Ranger ‘T6? engine and undercarriage.
Speculation earlier last year suggested that Ford engineers would continue with independent front suspension, but it was unclear what they would do with the rear.
We can exclusively tell you the 2012 Ford Ranger ‘T6? will feature independent double wishbone front suspension with coil springs, while the rear will use semi-elliptic leaf springs with dampers.
While the leaf spring rear suspension does nothing for ride and handling, it will help retain the Ranger’s impressive 3000kg towing capacity. Rear drum brakes also remain on the Ranger, it’s likely that rear disc brakes won’t make it to the production model.
Ford Australia has been awarded the job of developing and designing the 2012 Ford Ranger ‘T6?. Ford Motor Company of Australia representative, Sinead McAlary told CarAdvice:
Ford Australia announced in 2006 that it had won the work to be the lead design and engineering centre for the development of the T6 platform, off which the next generation Ranger comes from.
The first “top hat” from that platform is the next Ranger and FOA has led the design and engineering of that vehicle as well - right here in Melbourne and at our proving ground in Lara. We’ve also had significant input into the Mazda variant that comes off the same platform. It has been a major program of work for the company over the last number of years.
One of the key complaints issued with the outgoing Ford Ranger and Mazda BT-50 was the width of the vehicle. The B-series of utes that share the Ranger and BT-50 model designations were always limited to Japan’s 1.7m width limitations.
As you can see by these spy photos, the width has clearly increased. The increase in width suggests a vehicle that will compete squarely with the HiLux, Navara et al. in terms of size.
It’s clearly hard to see the exact shape of the 2012 Ford Ranger ‘T6? body, courtesy of clever padding used to obscure the lines, but one thing’s for sure, it will have an Australian design influence. With regards to the markets that will receive the new Ranger, Ms. McAlary told CarAdvice:
…The next generation Ford Ranger is a global vehicle and will be sold in more than 100 countries worldwide, including Australia. The only ‘major’ market that won’t be receiving it at the moment is North America. It will definitely be sold here though.
Our sleuth spies have also snapped scoop photos of one of the engines to be used in the 2012 Ford Ranger ‘T6?.
Although speculation suggests that the 2012 Ford Ranger ‘T6? will use a 1.6-litre variant of the new line of Ford global EcoBoost engines, we believe the Ranger will utilise the 2.0-litre variant of the EcoBoost engine. The upcoming Volkswagen Amorak will hit the ground running with a 2.0-litre turbocharged petrol engine, the 2012 Ford Ranger ‘T6? is likely to be the same if it is to compete on level ground.
Pictured on this production prototype is Ford’s 3.2 litre Puma turbocharged diesel engine. It will replace the current 3.0-litre four-cylinder diesel engine. The 3.2 litre Puma engine produces 150kW and an impressive 470Nm of torque. It can currently be found in the Ford Transit.
Insider sources also suggest two other engines will be available in the Ranger. A 2.2 litre four-cylinder turbocharged diesel engine (also codenamed Puma) and a 2.5 litre Duratec petrol engine (identical to engine currently used in Mazda3) will also be available, in addition to the 2.0 litre EcoBoost engine mentioned above.
Transmissions expected to make it to launch are the MT75 (five-speed manual gearbox), MT82 (six-speed manual gearbox produced by Getrag) and the 6R80 (six-speed fuel efficient automatic gearbox).
Insider sources have also suggested that the Ford Ranger will be available with leather seats (optional) and a reversing camera.
The 2012 Ford Ranger ‘T6? is shaping up to be an impressive commercial vehicle. We will keep you posted with all new details that come to hand.
Related posts:
- 2012 Ford Ranger T6 Interior Spied Pavle.com.au spy photographers have been busy this month. In addition to the FPV Coyote V8...
- 2012 T6 Ford Ranger Interior Scooped It’s been a busy week at the Pavle.com.au photo desk. Our spy photographers have snapped...
- 2011 Ford Ranger Cab Chassis Spy Photos Due for release later in 2011, the locally engineered global Ford Ranger utility release is...
- 2011 Mazda BT-50 Cab Chassis Spy Photos As seen with our recent post revealing the 2011 Ford Ranger Cab Chassis, similar images...
- Renault Samsung SM5 spied testing in Australia Pavle.com.au photographers have spied the Renault Samsung SM5 testing in Australia with a new V6...
- 2012 HSV Clubsport R8 Review Photos Pavle.com.au photographed the 2012 HSV Clubsport R8 for a recent CarAdvice road test conducted by...
Filed under: Ford, Site News, spy photos on April 1st, 2010
It’s super site, I was looking for something like this
Hiya, I am really glad I have found this info. Today bloggers publish only about gossips and internet and this is really irritating. A good blog with interesting content, that is what I need. Thank you for keeping this web site, I will be visiting it. Do you do newsletters? Cant find it.
That’s fantastic, I never ever thought of Nostradamus from the OR”